|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
C5260 Typical Applications Base Stations Test Equipment Switching Portable Equipment VCXO Features Surface Mount FR4 based Package Reflow Process Compatible AT-Cut Crystal Low Phasenoise Frequency range Standard frequencies Frequency stabilities1 Parameter vs. operating temperature range (Referenced to +25C) Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging /1. Year vs. aging / year (followingYears) Min -15.0 Min -10.0 -3.0 -1.0 -3.0 -1.0 Typ Typ 1 MHz - 160 MHz 16.384; 30.720; 32.768; 38.880 MHz; 51.840; 52.00; 68.736; 77.760; 155,52 MHz Max. +15.0 Max. +10.0 +3.0 +1.0 +3.0 +1.0 Units ppm Units ppm ppm ppm ppm ppm Operating temp range -20 ... +70C Condition @vc=Vs/2 VS 5% Load 10% Ordering Code D105 5 Frequency stabilities1 Parameter vs. operating temperature range (Referenced to +25C) Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging /1. Year vs. aging / year (followingYears) Min -30.0 Min -15.0 -3.0 -2,0 -3.0 -1.0 Typ Typ Max. +30.0 Max. +15.0 +3.0 +2.0 +3.0 +1.0 Units ppm Units ppm ppm ppm ppm ppm Operating temp range -40 ... +85C Condition @vc=Vs/2 VS 5% Load 10% Ordering Code F305 5 Supply voltage Parameter Supply voltage (Vs) Current consumption Current consumption Supply voltage (Vs) Current consumption Current consumption Current consumption Min 4.75 Typ 5.0 Max. 5.25 40 90 3.465 30 80 25 Units VDC mA mA VDC mA mA mA Condition Ordering Code SV050 @ HCMOS @ PECL SV033 @ LVHCMOS @ LVPECL @ LVDS 5 3.135 3.3 RF output Parameter Signal Load Rise and Fall time Duty cycle Signal Load Rise and Fall time Duty cycle Signal Load Rise and Fall time Duty cycle Min Typ HCMOS 15.0 Max. Units pF ns % ns % ns % Condition Ordering Code RFH 5 40 PECL 50 45 LVDS 100 40 5 60 @ 15 pF 10 to 90 % @ Vs/2 RFP Vs - 2V 20 to 80 % RFL 1 55 1 60 10 to 90 % Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2006-03-07 * page 1 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C5260 VCXO Frequency Tuning (EFC) Parameter Tuning Range Linearity Tuning Slope Control Voltage Range Frequency control input impedance Min 75.0 100.0 Typ 90.0 140.0 Max. +200.0 200.0 10 Positive 1.65 3.3 2.5 4.5 Units ppm ppm % VDC VDC k Condition Frequency > 53MHz Frequency <53MHz 0.0 0.5 10 with Vs=3.3VDC with Vs=5.0VDC Additional parameters Parameter Phase Noise Min Typ -75 -110 -135 -142 -142 Jitter Weight Processing & Packing 1 2 handling&processing note Max. Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS g Condition 10 Hz @155 MHz 100 Hz 1 kHz 10 kHz 100 kHz @ 10 kHz to 20 MHz PECL 3,3V Enclosures Type G241 < 53 MHz Package Codes: Code A1 Height "H" 2,3 mm Code B1 Type G251 > 53 MHz Height "H" 2,3 mm Dimensions: mm Dimensions: mm Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2006-03-07 * page 2 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C5260 Pin Connections Control Voltage (Vc) N/C / Enable (optional) Ground RF Output N/C Supply Voltage Input (Vs) Pin Connections Control Voltage (Vc) N/C / Enable (optional) Ground RF Output Complementary RF Output Supply Voltage Input (Vs) LVDS Pin 4 Pin 5 Data compl. Data Data compl. Data High Tristate High Tristate VCXO 1 2 3 4 5 6 1 2 3 4 5 6 true table Pin 2 High Open Low Marking 5A1-xxx frequency * VI AYYWW Pin 4 Low Data Data LVPECL Pin 5 High compl. Data compl. Data Absolute Maximum Ratings Parameter Supply voltage (Vs) Operable temperature range Storage temperature range Min -30 -40 Typ Max. 7 +80 +90 Units V C C Condition Typical Phase Noise and Jitter (52 MHz; HCMOS output) (155,52 MHz; PECL output) Frequency range [Hz] 100Hz to 1.5MHz 50kHZ to 1.5MHz 12kHz to 20MHz S(f) [dB] -81dB -87dB -85dB Jitter [ps rms] 0.26ps 0.14ps 0.16ps Frequency range [Hz] 500Hz to 1.5MHz 65kHZ to 1.5MHz 12kHz to 20MHz S(f) [dB] -73.96dB -75.87dB -65.34dB Jitter [ps rms] 0.205ps 0.165ps 0.553ps Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2006-03-07 * page 3 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C5260 VCXO Typical tuning slope 2 00 ,00 1 50 ,00 Typical frequency stability vs temperature 20 15 10 1 00 ,00 5 50 ,00 ppm 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 0 ,00 0,00 -50 ,00 -10 0,50 1,00 1,50 2,00 2,50 3 ,0 0 3 ,5 0 -5 -1 00 ,00 -15 -1 50 ,00 Tuning voltag e [V] -20 Temp. [C] Standard Shipping Method A X B P Enclosure Type G241 / G251 *bei W 24 mm nur untere Lochreihe by W 24 mm only lower hole line Lage im Gurt Position in tape Pin 1 Abwickelrichtung Unwinding direction K Gurtunterseite Tape buttom side Gurtoberseite Tape upper side Tape width W [mm] 12 Quantity per meter 125 Quantity per reel tbd Dimension P 8 Production tolerance complying DIN IEC 286-3 Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2006-03-07 * page 4 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C5260 VCXO Recommended Reflow Profile Profile Feature Average ramp-up rate (TL to Tp) Preheat -Temperature Min Tsmin) -Temperature Min Tsmax) -Time (min to max) (ts) Tsmax to TL - Ramp-up Rate Time maintainted above - Temperature (TL) - Time (tL) Peak Temperature (Tp) Pb-Free Assembly /Sn-Pb Assembly 3C/second max. 150c 200c 60-180 seconds 3C/second max. 217C 60-150 seconds max 260C Profile Feature Time 25C to Peak Temperature Time maintainted above - Temperature (TL) - Time (tL) Pb-Free Assembly /Sn-Pb Assembly 8 minutes max. 217C 60-150 seconds Time within 5C of actual Peak Temperature (tp) Ramp-down Rate 20-40 seconds 6C/second max. Note: All temperatures refer to topside of the package, measured on the package body surface. SMD oscillators must be on the top side of the PCB during the reflow process. How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative: Model C5260 Example: C5260 D105 SV050 RFH A1 Stability Code Supply Voltage Code RF Output Code Package Code Step 2 The factory representative will then respond with a Vectron Model Number in the following Configuration: Model C5260 Package Code [Customer Specified Package Code] Dash Dash Number [Factory Generated 4 digit number] Typical P/N = C5260A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2006-03-07 * page 5 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax |
Price & Availability of C5260 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |